Payment & Shipping Terms:
|Product Name:||Programmable Walk-in Test Chambers||Volume(M3):||12.9CBM|
|Humidity Constancy:||+/-2.5%R.H||Temp. Constancy:||+/-0.5oc|
|Interior Dimensions:||W3000 X H2100 X D2050mm||Exterior Dimensions:||W4160 X H2350 X D2250mm|
|Cool Method:||Water Cooled , Air Cooled Is Optional|
12.9CBM Walk-In Environmental Chamber with Water Cooled 100% insulation test chamber
1. All Walk-in Room Systems
a. Operate continuously in cooling mode.
b. Provide a hot gas by-pass system to automate capacity reduction when the room is at the set point temperature.
c. Are constructed with high quality components including: liquid line solenoids, liquid sight glass, dryers, strainers, and TX valves.
d. Contain Bock semihermetic (or equal ) compressors.
e. Contain LED Touchscreen (or equal) controls.
f. Comply with ASHRAE guidelines for piping and rating.
g. Are factory-assembled and tested.
h. Are simple to maintain because components are easily accessible and clearly labeled.
Up to 5 HP units can be mounted on the roof of the walk-in room. Larger units are installed on the floor next to the room.
Comprehensive piping diagrams, schematics, and charging data are available for our environmental walk-in rooms.
2. Main Technical Parameters
|Interior Dimensions||W3000 x H2100 x D2050mm|
|Exterior Dimensions||W4160 x H2350 x D2250mm|
|Safety Devices(standard)||No fuse breaker, over pressure, over heat and over current protection for compressor, over temperature protection, over load protection for blower, dry heat protection|
|Standard accessories||Sight window*1, cable port ( portΦ50mm ) *1, chamber lamp*1, status indicator|
|Control System||Balanced Temperature & Humidity Control System|
|Refrigeration system||Water Cooled|
|Semi-hermetic compressor, single stage or cascade refrigeration system,|
|CFC free refrigerant ( HFC-507 and HFC-23 )|
|Controller||Panel||7-inch LCD Touch panel, Chinese or English display selectable|
|Operation model||Program or fix point running|
|Memory capacity||120 programs,1200steps, all repeat 999 cycles,part repeat 99 cycles|
|Accuracy||Temp.:0.1% of F.S ± 1 digit Humidity:0.1% of F.S ± 1 digit|
|Input||Temp.: pt-100, Humidity: pt-100 or ～5V DCV|
|Comm.port||RS-232 or RS-485 ( Softawre is option)|
|Temp. range||Maximum: 80 ºC,120 ºC;
Minimum: -60 ºC, -50 ºC, -40 ºC, -30 ºC, -20 ºC, -10 ºC, 0 ºC
|Humidity Range||10%, 20%, 30% ~ 95%|
|Temp. constancy||±0.5 ºC|
|Temp. uniformity||±2.0 ºC|
|Ambient Temp.||+5 ºC～+35 ºC|
|Wiring method||AC 380 ± 10% 50Hz ,3 phase 4 wires + Ground Wires|
|Heat up time||+20 ºC～+80 ºC, Within 60 min|
|Pull down time||+20 ºC ~ -55 º, -40 ºC, -20 ºC, -10 ºC, Within 120 or 90 or 60 min|
|Interior material||Stainless Steel Plate(SUS 304)|
|Exterior material||Baked Painting Steel Or Stainless steel ( SUS304)|
|Insulation material||Rigid polyurethane foam|
|Door size (mm)||Single wing: W800 x H1800; Double wing: W1600 x H1800;|
|Note:1. We reserve the right to change specifications without prior notice 2.Customized sizes and configurations available|
3. Walk-in Room Construction:
Rooms are constructed of Stainless Steel metal tongue and groove sectional panels. An assembled room has continuous steel perimeters to hold panels tightly in place.
Panel features include:
1) 100% insulation
2) Light weight for easy handling – average weight of the largest panel is 84 lbs.
3) Alignment pins for accurate fit.
4) Steel straps connect locking arms with locking pins on opposite sides of panels.
5) Cam-actuated locks ensure tight fits and accommodate frequent assembly / disassembly for relocating or enlarging the room.
4. Our Service:
Customers from more than 32 countries purchased our climatic test chambers, we deeply realized that quality is the first and most. We control quality from the materials, electronic parts, controller, compressor, solenoid valve, pumps, lamps, accessories and many assembly parts of the products. After test chamber completed, we test its performance, inspect its functionality, go commissioning, work on calibration, and issue report for every steps, to guarantee the quality. We also pay more attention to delivery and shipment. We guarantee delivery on time, and have the obligation to advance delivery.
Third Party Inspection
All our test chambers accept third party inspection, such as SGS, UL, CSA, CE, RoHS…etc. Third party inspects on electrical system, material, accessories and whole machines, and delivery. We closely cooperate with third party to complete the inspection.
3 Years Warranty
We provide 3 years warranty service. In order to guarantee purchaser to better use our test chambers, our service department directly provide pre-sale consultation, after sales service of training of installation and operation, fault handling, replacing accessories, and sending our engineers to their workplace. Now we have some cooperated overseas local service companies to offer machines and service to foreign customers.
We have elite team to service our customers. We provide professional solutions, right equipments, accurate answers, and timely reply to our worldwide customers. When we get questions and requests, we reply within 1-3 hours to our clients. Welcome to contact us for more information.