Payment & Shipping Terms:
|Hot Zone Temp.range:||+80℃~+200℃||Interior Chamber Material:||SUS#304 Stainless Steel|
|Exterior Chamber Material:||Cold Rolled Steel Sheet+Powder Coated||Power Supply:||AC 3phase380V 60/50Hz|
|Cooling Mode:||Water Cooled||Controller:||Touch Screen Programmable Controller|
2- zoneThermal shock test chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm. Application objects, including metal, plastic, rubber, electronics and other materials can be used as a basis to improve their products or reference.
1. Precision LCD touch panel controller, can display Chinese / English.
2.High formula memory capacity can be set to 120 patterns. The maximum cycle setting is 9999 times. The maximum setting time of each pattern is 9999 hours 59 minutes.
3. Equipped with RS-485C communication interface port, capable of controlling / editing/ recording in the linkage with the computer and two set dynamic connection point and convenient application.
4. Both 2 zone and 3 zone chambers can be chosen. The inner chamber size can be customized as per your request.
Thermal shock chamber specification
|Test zone size w×h×d||36×35×40||50×40×40||60×40×45||60×60×60||60×70×60|
|Exterior chamber size w×h×d(cm)||120×182×150||143×195×160||151×185×185||151×205×200||151×215×200|
|Hot zone temp.range||+80℃~+200℃|
|Cold zone temp.range||-10℃~-40℃,-10℃~-60℃,-10℃~-70℃|
|Test zone temp.range||-60℃~+150℃,-10℃~-40℃,-10℃~-55℃,-10℃~-65℃|
|Cooling time||℃||-40 -55 -65|
|min||60 70 80||60 70 80||80 90 100||90 100 110||100 110 120|
|Material||Exterior chamber material||Cold rolled steel sheet+Powder Coated|
|Interior chamber material||SUS#304 Stainless steel|
|Wind circulation||Cooling fan|
|System||Heating system||SUS#Stainless steel high-speed heater|
|Cooling system||Tecumseh compressor,fin type evaporator,air/water cooling condenser|
|Control system||Korea's ternary controller|
|Accessories||Vacuum glass observation window,cable port(dia.50mm),status indicator,window light,racks×2pcs|
|Safety devices||Over-heat circuit breaker,compressor overload protection,control system overload protection,humidifying system overheat protection,overload indicator|
|Power supply||AC 3phase380V 60/50Hz|
|Customization service||Non-standard or special requirements are all welcome|
1) More than 13 years manufacturer experience and 8 years export experience.
2) Acceptable customization for all kinds of special specification products.
3) We value very inquiry sent to us, ensure quick and competitive offer.
4) We put your order into our tight production schedule, ensure your punctual delivery time.
5) We are a sales team, with more than 4 years experience, more professional and reliable
6) Welcome to view our factory at any moment.