Payment & Shipping Terms:
|Product Name:||Programmable Thermal Shock Test Chamber Fast Cycling Hot And Cold||Certificate:||ISO9001:2015, CE|
|Temperature Shock Range:||-60~150℃||Temperature Deviation:||±2.0℃|
|Usage:||Universal Testing Machine||Body Materials:||SUS#304 Stainless Steel Plate|
|Compressor:||Original Germany Bitzer Brand||Power Supply:||380V|
Two Room Thermal Shock Test Chamber With Rapid Heating And Cooling Rate
Introduce of Thermal shock test chamber
2 zone thermal shock test chamber for Semiconductor with separate hot and cold zones, the Automated Thermal Stress System has a patented, retractable product transfer carrier basket that makes full use of the available workspace in both temperature zones for increased product loading and throughput. The product transfer carrier basket reduces the overall height requirements of the chamber and is made as light as possible to minimize thermal loading restraints. Thermotron ATSS chambers can be used as part of most thermal cycling reliability and quality control programs.
Thermal cycle testing can help determine
• If the product will safety operate after sudden and dramatic temperature changes
• The life expectancy of a product by revealing its aging properties
• With environmental stress screening (ESS) applications
|Inner size: WHD(cm)||40*35*30||50*30*40||50*40*40||50*50*40||60*40*50||60*50*50|
|External size: WHD(cm)||150*180*150||160*175*160||160*185*160||160*185*170||170*185*170||170*195*170|
|Temperature range(Test Chamber)||high temperature:+60℃~+200℃;low temperature -10℃~-65℃(A:-45℃;B:-55℃;C:-65℃)|
|Heating Time||RT~200℃ About 30min|
|Cooling Time||RT~-70℃ About 85min|
|Temperature Conversion Time||Less than 10S|
|Temperature Recovery Time||Less than 5min|
|Material||External material: SUS#304 Stainless steel plate|
|Output Mode||Water-cooled or air-cooled,Taikang compressor in France|
|Controller||TEMI South Korea|
|Cooling System||Water-cooled or air-cooled,Taikang compressor in France|
Fuse switch, compressor overload switch, refrigerant high and low pressure
protection switch,super humidity over-temperature protection switch,
fuse, failure warning system
|patrs||Watching window;50mm testing hole; partition plat|
|Power||AC380V 50/60Hz Three-phase four-wire ac power|
1.*Equipment area is divided into three areas: high temperature, low temperature, the test area of three parts, the test product is placed in the test area, the temperature of the high temperature zone or low temperature impact area into the test area impact , test products for Static.
2. *Using touch graphic control interface, easy operation, stable, safety
3.*The way of impact:Application of air duct switching temperature into test area,do the thermal shock impact test.
4*High temperature shock or low temperature impact, the maximum time up to 999H, the maximum cycle up to 9999 times.
5.*The system can be used for automatic cycle engine or manual selective impact shock and cold red hot red initiate and set two or three.
6.*Cooling adopt dual refrigeration system, the cooling effect of rapid cooling method for the water-cooled
7.*Can test the impact of RT,perform to meet the standards and test method: GJB150.5;GJB360.7;GB/2423.22
GB11158 GB10589-89 GB10592-89
GB/T10586-89 GB/T2423.22-2001 GB/T2423.1-2001
GB/T2423.2-2001 GB/T2423.3-93 GB/T2423.4-93
ASTM D1735 EIA - 364-59 IEC60068-2-1.1990
IEC60068-2-2.1974 IEC 68-2-30 IEC68-2-03 EIA - 364-31C