| Place of Origin: | China |
|---|---|
| Brand Name: | BOTO |
| Certification: | CE ISO |
| Model Number: | BT-ZT-4018 |
| Minimum Order Quantity: | 1set |
| Packaging Details: | wooden case |
| Delivery Time: | 5-25 days |
| Payment Terms: | L/C, T/T |
| Supply Ability: | 80 Set/Sets per Month |
| Chamber Size: | 400 × 400 × 500mm (depth × Width × Height) | Temperature Range: | -60 ℃ ~ + 150 ℃ |
|---|---|---|---|
| Temperature Rising And Falling Rate: | Linear 5 Degrees Between -40 ~ 70 ° (5 Degrees Per Minute) | Temperature Uniformity: | ≤ ± 2 ℃ |
| Temperature Deviation: | ≤ ± 2 ℃ | Inside Material: | SUS304 Stainless Steel |
| Wind Speed: | 1.7 ~ 2.5m / S (The Above Indicators Are Measured Under Ambient Temperature ≤25 ℃, Normal Pressure, No Load, No Load, And 1/6 Space From The Inner Wall Of The Cabinet | Power: | About 20Kw |
| Power Supply: | 380V ± 10% V; 50Hz | ||
| High Light: | LCD Programmable Environmental Test Chambers,20Kw Programmable Environmental Test Chambers,2.5m/S Programmable Environmental Test Chambers |
||
Overview:
The test box is to provide high and low temperature constant, high and low temperature test environment; including refrigeration system, heating system, air duct system, control system, system safety protection device, etc.
Technical parameter:
|
Chamber size |
400 × 400 × 500mm (depth × width × height) |
|
Temperature range |
-60 ℃ ~ + 150 ℃ |
|
Temperature rising and falling rate |
linear 5 degrees between -40 ~ 70 ° (5 degrees per minute) |
|
Temperature uniformity |
≤ ± 2 ℃ |
|
Temperature deviation |
≤ ± 2 ℃ |
|
Inside material |
SUS304 stainless steel |
|
Wind speed |
1.7 ~ 2.5m / s (The above indicators are measured under ambient temperature ≤25 ℃, normal pressure, no load, no load, and 1/6 space from the inner wall of the cabinet |
|
Power |
about 20Kw |
|
Power supply |
380V ± 10% V; 50Hz |
Standard:
GB / T2423.22-87Nb GJB1032-90 MIL-STD-2164 / (E / C)
GB / T2423.4-93 GB / T2423.34-86 GJB150.9-86
Test box structure:
Integral structure, that is, test box, refrigeration system, heating system, air conditioning system, electrical control cabinet, and refrigeration unit are integrated. The refrigeration unit is located at the bottom of the cabinet, and the electrical control part is placed on the side of the test box for easy operation.
1. Cabinet:
a) In the air duct inter layer at one end of the working room, there are heating / humidifier, refrigeration evaporator, blower motor, fan blade and other devices;
b) There is one cable threading hole on the side of the test box, the size is Φ50mm;
c) The test chamber studio is made of 1mm thick SUS304 stainless steel plate, and the cabinet shell is made of 1mm thick high-quality stainless steel
d) The insulation material is made of polyurethane foam, with a thickness of 100mm, good insulation effect, and no frost or condensation on the outer surface of the test chamber.
e) The studio is equipped with two layers of adjustable stainless steel strip shelves;
f) The box body is equipped with condensate drain.
2. Cabinet Door:
For single-open doors, double-line silicone rubber sealing strips are used for door sealing;
3. Observation and lighting device:
A multi-layer hollow glass observation window is installed on the door, the size is about 300 × 275mm, and a heating anti-frost device is provided. A 20W halogen lamp (AC12V) is installed on the door of the test chamber.
Packaging & Shipping
Honor and certification
Cooperative partners
