Payment & Shipping Terms:
|Workspace Volume:||W1500 X H1500 X D1500mm||Volume:||3.375CBM|
|Material:||SUS304 Stainless Steel||Type:||Split Type|
|Temperature Range:||-40 °C To 150 °C||Name::||Temperature Humidity Test Chamber|
Humidity Test Chamber -40 °C To 150 °C Constant Walk In Climatic Test Chamber Water Cooled Temperature
Temperature and Humidity Test Capabilities
HASTON have a variety of temperature and humidity chambers from small to walk-in chambers that can reproduce a wide range of climatic conditions incluiding high and low temperature as well as combined temperature and humidity conditions. HASTON also support a climatic test facility dedicated to tests against requirements for telecoms and radio products.
1. Walk-in constant temperature and humidity test chamber
Walk in high and low temperature test chamber is widely used in the detection of electronic equipment, IT communications, automobile, industrial and electrical, instrumentation, materials, energy, chemical and other products,for heat, cold, dry, moisture-resistant environmental adaptability.
2. Main Technical Parameters
|Control System||Balanced Temperature & Humidity Control System|
|Heat up time||+20ºC~+80ºC ,Within 60 min|
|Pull down time||+20ºC~-55ºC -40ºC-20ºC-10ºC ,Within 120 or 90 or 60 min|
|Interior material||Stainless Steel Plate(SUS 304)|
|Exterior material||Baked Painting Steel Or Stainless steel(SUS304)|
|Insulation material||Rigid polyurethane foam|
|Door size (mm)||Single wing:W800*H1800;Double wing:W1600*H1800;|
|Safety Devices(standard)||No fuse breaker, over pressureover heat and over current protection for compressor,
over temperature protection, over load protection for blower, dry heat protection
|Standard accessories||Sight window*1,cable port(portΦ50mm)*1,chamber lamp*1, status indicator|
|Refrigeration system||Water Cooled|
|Semi-hermetic compressor, single stage or cascade refrigeration system|
|CFC free refrigerant(HFC-507 and HFC-23)|
|Controller||Panel||7-inch LCD Touch panel,Chinese or English display selectable|
|Operation model||Program or fix point running|
|Memory capacity||120 programs,1200steps, all repeat 999 cycles,part repeat 99 cycles|
|Accuracy||Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit|
|Input||Temp.:pt-100, Humidity:pt-100 or ~5V DCV|
|Comm.port||RS-232 or RS-485 (Softawre is option)|
|Wiring method||AC 380±10%50Hz ,3 phase 4 wires +Ground Wires|
|Note:1. We reserve the right to change specifications without prior notice|
|2.Customized sizes and configurations available|
1) Stainless steel interior
2) Painted galvanized steel exterior for long life
3) MAP service doors are hinged (no tools or lifting)
4) Easy access to frequently checked refrigeration components
5) Reliable steam generator system for humidity applications
6) Adjustable vanes in supply grille allow directing of airflow as needed
Flexibility for structure
The panels used in our chamber are 4” (100mm or 150mm) Thick urethane-foam sandwiched between a stainless-steel interior wall and a coated-steel exterior. An assembled box is self-supporting. So that no heavy structural members are required. Different door sizes, flooring upgrades,access ports, and other modifications are possible.
Widest test range, most customizable
5. Meet the standard
● GB-2423. 1-89(IEC68-2-1)Test A: Low Temperature Test
● GB-2423.2-2008(IEC68-2-2)Test B: High Temperature Test
● GJB360.8-2009(MIL-STD.202F) High Temperature Life Test
● GJBl50.3-2009(MIL-STD-810D) High Temperature Test
● GJBl50. 4(MIL-STD-810D) Low Temperature Test
● GB2423.3-2008(IEC68-2-3)Test Ca: Constant Heat Test
● GB2423.4-2008(IEC68-2—30) Test Db: Damp Heat Alternative Test
● GJBl50.9-2009(MIL-STD-810D) Damp Heat Test
6. Optional accessories
● Cable Port: Two size of cable port is available: Φ50mm, Φ100mm, Φ120mm
● Double door
● Pass room: Provided to avoid disturbance of atmospheric temperature and humidity while opening the door.
● Floor reinforcement: Can be fixed if heavy specimen placed in the chamber for test.
● Carry-in inclined platform: Provided below the door to facilitate moving of specimens in and out through the door.
● Entire ceiling blow-out duct
The extremely wide air inlet reduces the airflow rate (down to apprrox.0.5m/s)
The rotation regenerating dehumidifier (M-300)ensures precise control of low humidity (21℃,23%RH)for electrostatic reliability tests.
● Temperature and humidity recorder
100mm width recording paper with 6 dots
180mm width recording paper with 12 dots
● Status indication lamp
Provide to signal chamber status and warnings when normal running, a malfunction running or stand by occurs.
● Water purifier
Provided to keep the humidifier heater free from scale and ensure the supply of water to humidifier.
● Power socket
● Air cooled or water cooled type condenser
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
(HASTON often tenders successfully in universities in China)
1)Delicate touch and excellent user experience
2)Unique and compact design, top grade appearance, stable performance and easy operation.
3)Can simulate a wide range of temperature and humidity environments
4)Capable of testing large components, assemblies, and finished products
5)Customized sizes and configurations available
6)1 year warranties
Standard Met and Implemented:
GB/Bb T2423.2-89 high temperature test method
GB2423.1-89 test A: low temperature test method 6
GJB150.4-1986 test at low temperature
IEC60068-2-1 low temperature test method
IEC60068-2-38 temperature cycle
IEC60068-2-78 constant humidity temperature
1. Fabricated cold room;
2. Energy saving design;
3. R404a environment friendly refrigerant;
4. Bitzer or BOCK compressor
(1) Condensing unit: Bitzer, BOCK, Tecumseh
(2) Evaporator: KELTESS air-cooler.
(3) Insulation Panel: PU, EPS.
(4) Other accessories: world-famous brands, like Danfoss, Castle, Every Control, Siemens, LG,Schneider
1). Swing door and sliding door for choice.
2). Swing door:manual opened,automatic,etc.
3). Door board made with special pressing technology PU material.
4). Door frame:color steel or stainless steel.
5). Surface material:color steel or stainless steel with protecting film.
Cold room insulation panel:use 100% polyurethane insulation panel,density about 38~46kg/m3, with gasket,with flame retardant,panel thickness:100mm~200mm, standard width of panel is 960mm