Payment & Shipping Terms:
|Low Temp. Chamber:||-55°C~-10°C||High Temp. Chamber:||+60°C~+200°C|
|Usage:||Auto Testing Machine||Test. Chamber:||-40°C~+150°C|
|Exterior Material:||Baked Painting Steel Or Stainless Steel||Interior Material:||Stainless Steel Plate(SUS304)|
Basket Type 2 Zones Climatic Temperature Stainless Steel Thermal Shock Test Chamber
1.Benchtop Ozone Environmental Thermal Shock Test Chamber is divided into three sections: the high temperature chamber, the low temperature chamber and the testing chamber.
2.The color touch panel control system was made in Japan can display Chinese / English. The big size liquid-crystal LCD has been adopted.
3.High formula memory capacity may be set to 120 patterns. The maximum cycle setting is 9999 cycles. The maximum setting of each section is 999 Hrs 59 Mins.
4.Provide with RS-232C communication interface device, capable of controlling / editing/ recording in the linkage with the computer and two set dynamic connection point and convenient application.
5.Both 2 zone and 3 zone shocks can be chosen.
6.All equipment is fully automatic, and all process are precisely controlled with P.L.C.’S.
7.Of any part of the malfunctions, the machine will automatically shuts down and a warning light switches on.
8.Machine can be shut down automatically in case of electrical power instabilities.
Specifications of Industrial Rubber Aging Oven:
Benchtop Ozone Environmental Thermal Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, can used to test its thermal expansion and contraction caused by chemical change or physical harm in the shortest time, are widely applied for metal, plastic, rubber, electronics and other materials and it can be used as an important reference for improving product qualitys.
|Test zone size w×h×d(cm)||36×35×40||50×40×40||60×40×45||60×60×60||60×70×60|
|Exterior chamber size w×h×d(cm)||120×182×150||143×195×160||151×185×185||151×205×200||151×215×200|
|Hot zone temp.range||+80℃~+200℃|
|Cold zone temp.range||-10℃~-40℃,-10℃~-60℃,-10℃~-70℃|
|test zone temp.range||-60℃~+150℃,-10℃~-40℃,-10℃~-55℃,-10℃~-65℃|
|Cooling time||℃||-40 -55 -65|
|min||60 70 80||60 70 80||80 90 100||90 100 110||100 110 120|
|Material||Exterior chamber material||Cold-rolled steel+Powder coating|
|Interior chamber material||SUS#304 Stainless steel|
|Wind circulation||Cooling fan|
|System||Heating system||SUS#Stainless steel high-speed heater|
|Cooling system||Tecumseh compressor,fin type evaporator,air/water cooling condenser|
|Accessories||Vacuum glass observation window,cable port(dia.50mm),status indicator,window light,racks*2pcs|
|Safety devices||Over-heat circuit breaker,compressor overload protection,control system overload protection,humidifying system overheat protection,overload indicator|
|Power supply||AC 3phase 380V 60/50Hz|
|Customization service||Non-standard or special requirements are all welcome.