Payment & Shipping Terms:
|Brand Name:||Salt Spray Corrosion Test Chamber||Temperature Range:||NSS.ACSS 35℃±1℃/CASS 50℃±1℃|
|Temperature Air Cylinder:||NSS.ACSS 47℃±1℃/CASS 63℃±1℃||Max Volume Of Test Liquid:||15L|
|Spray Quantity:||1.0~2.0ml/80cm2/h||PH:||6.5~7.2 3.0~3.2|
Salt Spray Test Chamber Cyclic Corrosion Acclerated With ASTM B117 Standard
Salt spray test is a corrosion test,which uses high-saline environments to measure the corrosion resistance of products, paints and coatings over extended periods.
Sometimes referred to as salt fog, a salt spray test is conducted in a closed chamber that can be adjusted to create a variety of corrosive environments. During testing, samples are subjected to a specified salt concentration for a pre-determined amount of time, based on specification, product type, or industry standards.
|Model||HST-SS -2001C||HST-SS -2001B||HST-SS -2001A|
|Inside box size(cm)||60x45x40||90x60x50||120x80x50|
|Outside box size(cm)||107x60x118||141x88x128||190x110x140|
|Testing room temperature||Salt test (NSS ACSS)35°C±1°C/ Corrosion Test(CASS)50°C±1°C|
|Pressure barrel temperature||Salt test (NSS ACSS)47°C±1°C/ Corrosion Test (CASS)63°C±1°C|
|Brine temperature||35°C±1°C 50°C±1°C|
|Testing room Capacity||108L||270L||480L|
|Brine tank capacity||15L||25L||40L|
|Salt concentration||The concentration of sodium chloride5% orthe 5% concentration of sodium chloride add 0.26g per liter of copper chloride(CuCl2 2H2O)|
|Spray volume||1.0~2.0ml/80cm2/h (working at least 16 hours, and then take the average)|
|Testing room relative humidity||85% above|
|Spray form||Programmable spray(Including continuous and intermittent spray)|
Salt spray test conditions
In a typical salt spray test, a standardized solution of 5% NaCl (sodium chloride) is used to create a highly corrosive atmosphere. For projects with additional requirements, we can often adjust environmental conditions like temperature and humidity to simulate specific climates or working conditions.
Samples are often checked at regular intervals to monitor corrosion levels and record any milestones, such as white and red rust development or coating degradation. Our labs can provide detailed test reports that include pictures and descriptions of each stage of testing, from start to finish.
Salt spray capabilities
We can assist in choosing the most appropriate test method for multiple coating types, including electroplated copper-nickel-chromium, electroplates copper-nickel, and anodized aluminum. We support salt spray tests for a variety of products and applications, and our corrosion experts are highly trained across multiple disciplines. With a global platform of accredited, high-capacity labs, Element helps ensure that your projects are accurate, on-time, and within budget.
Alternative salt spray test conditions
Alternative salt spray testing can simulate a variety of corrosive environments to ensure the integrity of a product.
When routine testing isn’t enough,We HST offers alternative salt spray test methods to cover a variety of conditions. For large or unusually shaped components , we can do customized salt spray test chamber to satisfy different requirements. Some of our capabilities include: