|External Dim:||270x130x159||Low Temp Range:||-10℃--60℃|
|Test Temp Rang:||-40℃-150℃||Power:||AC:220V 50Hz/AC:380V 60Hz|
|Model:||B-SST-200||PH Value:||Saline Test Method:6.5-7.2/Corrosion Test Method:3.0-3.2|
Industrial 15000 Egg Incubator,
5.6KW Farm Hatching Egg Incubator,
168 Hatcher Basket Egg Incubator
Climatic GB10485-89 Manufacturer Salt Spray Corrosion Test Chamber Machine GJBl50.9-86
The salt spray test chamber is a climate simulation device that tests the corrosion of electronic equipment, metallic material, as well as some surface treatment--coating, galvanizing, organic/inorganic coating, anodizing treatment, rust-proof oil coating, etc. Performance indicators in line with requirements of GB / T5170.8 Electrical and Electronic Products, Environmental Testing Equipment, the Basic Parameters of the Test Method. The salt spray corrosion test chamber according to GB / T2423.17 Electronic and Electrical Products Basic Environmental Test Procedures Test: Salt Spray Test Method for neutral salt spray test can also be used for acetic acid salt test.
Corresponding standard :
1.GB/T 2423.17-1993 salt spray test
2.GB/T 2423.18-2000 salt spray test
3.GB/T 10125-1997 salt spray test
4.ASTM.B117-97 salt spray test
5.JIS H8502 salt spray test
6.IEC68-2-11 salt spray test
7.IEC68-2-52 1996 salt spray test
8.GB.10587-89 salt spray test
9.CNS.4158 salt spray test
10.CNS.4159 CASS Accelerated acetic acid copper salt spray test
11..GB/T 12967.3-91 CASS Accelerated acetic acid copper salt spray test
Detailed configurations as follows:
1, according to CNS JIS ASTM GB2423.19 specifications, can be set constant temperature to control
(A) Salt spray test: NSS, ACSS
1. testing room : 35 ℃ ± 1 ℃
2 saturated air barrels : 47 ℃ ± 1 ℃
(B) anti-corrosion test: CASS (copper acetate)
1.testing room: 50 ℃ ± 1 ℃
2 saturated air barrels: 63 ℃ ± 1 ℃
2, air supply system: air pressure 1Kg/cm2 Two-stage adjustments (coarse / fine-tuning).
(A) the first paragraph for the rough adjustment 2-2.5Kg/cm2, the second paragraph to fine-tune 1Kg/cm2.
(B) Testing configuration is switch connector designed for SO2.
3, spray form:
(A) Using Bo Nute principle to draw brine and then saline spray, atomization uniform, non-blocking and crystallization, so that ensure continuous spraying.
(B) Nozzle: The nozzle is made of special glass, adjust spray volume and spray angle.
(C) spray volume: Adjustable 1 ~ 2ml (80cm2/hr) (average of 16-hour volume).
|Cabinet Material||Corrosion-resistant polymer material|
|Laboratory temperature (℃)||A:25℃~70℃ B:0℃-70℃ C:-20℃-70℃ D:-40℃-70℃|
|Saturated air barrel temperature(℃)||35±1℃50±1℃
Saline test method:35±1℃/Corrosion test method:50±1℃
|Saturated air pressure (kg/c㎡)||0.8-2.0±0.01|
Salt spray sedimentation rate (ml/80c㎡.h)
|PH value||Salt water test method:6.5～7.2／Test method for corrosion resistance:3.0-3.2
Saline test method:6.5-7.2/Corrosion test method:3.0-3.2
|Power Source||AC:220V 50Hz/AC:380V 60Hz|