Send Message

400kpa Simulation Resistance Rain Test Chamber With 16mm Spray Pipe

Basic Information
Place of Origin: CHINA
Brand Name: BOTO
Certification: ISO
Model Number: B-LY
Minimum Order Quantity: 1SET
Price: Negotiation
Packaging Details: PLY-Wooden case
Delivery Time: 20 Work days
Payment Terms: Western Union, L/C, T/T
Supply Ability: 2000set/month
Model: B-LY Studio Size: Oder
Carton Size: Undetermined Circular-arc Pendulum Tube Radius: 400mm
Length Of Right Angle Swing Pipe: 500mm Hydraulic Pressure: 50-400kpa(Adjust)
High Light:

Simulation Resistance Rain Test Chamber

,

400kpa Rain Test Chamber

,

16mm Spray Pipe Rain Test Chamber

Rain Spray Simulation Resistance Rain test chamber
 
 
Product description
Get wet in the rain in the rain test chamber is primarily to test the product in the climate environment of storage, transportation and use of performance test, mainly used in electrical and electronic products, lamps and lanterns, electrical cabinets, electrical components, automobile, motorcycle and parts, and other products under the condition of the climate simulation in the rain, and other related physical properties of the product testing, testing, To determine whether the performance of the product can meet the requirements through verification, so that the product can be used for design, improvement, verification and delivery inspection.
 
Use
The rain test chamber is mainly used to check whether the product shell/seal can guarantee the good working performance and technical status of the equipment and components after the rain test or during the test. At the same time, the product may be affected by water immersion in the process of transportation and use, which provides reference basis for product technical standards. Applicable to the artificial rain test based on natural conditions, without rain with strong wind speed, without considering the high temperature of the sample and rain temperature difference caused by a large number of water.
 

Application field

Consumer electronics industry, optoelectronics industry, biotechnology, academic research units, medical insurance industry, aerospace industry, semiconductor industry, communications industry, automotive industry, information industry.

 
Spec

Model B-LY
Studio size Oder
Carton size Undetermined
Structural features Circular-arc pendulum tube radius 400mm
Length of right Angle swing pipe 500mm
Hydraulic pressure 50-400kpa(Adjust)
Right Angle swing pipe spray pipe diameter 16mm
The tank material High grade stainless steel plate


 
Detail pic


400kpa Simulation Resistance Rain Test Chamber With 16mm Spray Pipe 0
 

PACKAGE&DELIVERY
1.Standard exported package: Internal anticollision protection, external export wooden box packaging.
2.Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.
3. Responsible for the damage during the shipping process, will change the damage part for you for free.
4.15-20days after confirming order,detail delivery date should be decided according to production season and order quantity.

400kpa Simulation Resistance Rain Test Chamber With 16mm Spray Pipe 1


FAQ


Q1: How can i get a quotation?
A1: Kindly provide us your details request (inner chamber size, temperature range, humidity range, power supply, product, etc.), leave us an inquiry or email and we will response promptly!
Q2: What's your temperature & humidity range?
A1: Our standards temperature range is -70℃~+180℃, 20%~98%RH.
We also can do Ultra low temperature to -190℃ .
Q3: What's your rate of heating & cooling?
A3: Our standards rate is average 3℃/min for heating, 2℃/min for cooling.
3℃/min,5℃/min,8℃/min,10℃/min,15℃/min linear or non-linear speed is available for us.
Q4: What's your warranty?
A4: 12 Months (Noted: free spares parts can be offered during warranty period, exclude consumables and man-made damages), life-time technical service

 

ABOUT US

 

BOTO GROUP LTD.Is a professional manufacturer of environmental test equipment and test service. Our company was established in 1998,the plant covers 55,000 square meters and a construction area of 6,800 square meters, existing 160 workers and we can provide operation video for machines.

400kpa Simulation Resistance Rain Test Chamber With 16mm Spray Pipe 2

The policy the company adheres to:TODAY'S QUALITY IS THE MARKET FOR TOMORROW.

 

400kpa Simulation Resistance Rain Test Chamber With 16mm Spray Pipe 3

400kpa Simulation Resistance Rain Test Chamber With 16mm Spray Pipe 4

 

Main market

400kpa Simulation Resistance Rain Test Chamber With 16mm Spray Pipe 5

 

 

 

 

SERVICE :If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide operation video for machines.

Onsite Service: 1.Device installation; 2.Equipment Operation Technology training; 3.Equipment Calibration; 4.Daily maintenance maintenance of equipment

 

Free technical training for visiting factories
24-hour Online contact
Free software upgrades
Free information:
1.Product Instruction;
2.Product operation instruction/video;
3.Experiment Test (test application, test report)
Device Problem Handling:
1.Social media 24 hours online communication;
2.Mail Seamless Docking;
3.Video Conferencing;
4.Artificial free door-to-door service

 

Production Process

400kpa Simulation Resistance Rain Test Chamber With 16mm Spray Pipe 6

Workshop Machine

400kpa Simulation Resistance Rain Test Chamber With 16mm Spray Pipe 7

 

Certification

400kpa Simulation Resistance Rain Test Chamber With 16mm Spray Pipe 8

The certificate is valid until June 17, 2024

400kpa Simulation Resistance Rain Test Chamber With 16mm Spray Pipe 9

BOTO ADVANTAGE

 

400kpa Simulation Resistance Rain Test Chamber With 16mm Spray Pipe 10

 

Our Team

 

400kpa Simulation Resistance Rain Test Chamber With 16mm Spray Pipe 11

 

 

Our Services

During the whole business process, we offer Consultative Selling service.

1) Customer inquiry process:

Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.

2) Specifications customize process:

Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.

3) Production and delivery process:

We will produce the machines according to confirmed PO requirements. Offering photos to show production process.

After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.

Deliver the products in confirmed shipping time and inform customer.

4) Installation and after sale service:

Defines installing those products in the field and providing after-sales support.

 

Contact Details
BOTO

Phone Number : +8613761261677

WhatsApp : +8613761261677