|Chamber Material:||304 Stainleass Steel||Tem Fluctudtiont:||≤±0.5℃|
|Heat-up Time:||About 1-15°C/min||Pull-down Time:||About 1-15°C/min|
|Temperature Range::||-70℃~+180℃ (or Customized||Usage:||Temperature Range|
|Power Supply:||AC220V 50/60Hz||Recovery Time:||Within 3 Minutes|
|Cooling Rate:||Average 1°C/min||Cooling Ratenside:||80L~1000L (be Customized)|
can be used when constant climate conditions (temperature and/or
humidity) are needed for product testing. It also can be used for a variety of materials of high - low temperature alternating test.
The test temperature, humidity, time can be programmed. Provides conditions of temperature from -70 to +150 degree and of
humidity from 20% to 98%, low humidity 10%~98%RH is available for us.
|Inner chamber size (CM)||70×90×80|
|External size W×H×D(cm)||105×243×243|
|Recovery time||Within 3 minutes|
|Power Source||AC:220V/380V 50/60Hz|
|Material||SUS 304# Stainless steel|
1.The constant temperature and humidity test box is mainly composed of control panel, distribution panel, insulation layer, air
supply fan, heater, humidifier and refrigeration unit. The main specifications can be divided into 6 standard sizes and 10
specifications under different conditions.
2.The controller can be connected to the computer through LAN interface. Users can design programs on the computer screen,
collect test data and records, call program execution, remote control machine switch and other functions.
3.The use of multi-wing air supply fan strong air circulation, to avoid any dead angle, so that indoor temperature and humidity
distribution is uniform.
4.Complete safety protection device, if abnormal conditions occur, the controller screen will automatically display the fault
status, cut off the power switch, and provide troubleshooting methods.