|Cutting Mode:||Manual/Y Axis Feed||Speed:||Standard Delivery 2850rpm, Optionl 500-3000RPM|
|Cooling Mode:||Water-cooling||Product Name:||Metallographic Cutting Machine|
|Cutting Method:||Automatic, Deadweight Cutting||Automatic, Deadweight Cutting:||50~800r/min|
|Control And Display:||Film Key Operation, LCD Display||Cut-off Wheel:||100x0.7x12.7mm|
Manual Metallographic Cutting Machine,
ISO Metallographic Cutting Machine,
metallographic sample cutting machine
Lab Small Low Speed Manual Automatic Metallographic Sample Cutting Machine
Metallographic cutting machine is consist of host, electric controller, motor, cooling system,cutting wheel blade. This cutting machine can cut circle
specimen which diameter is inner 100mm, and can cut rectangle specimen which height is 100mm, depth is inner 200mm. This cutting machine to cool
specimen by cooling system, to avoid specimen tissue will be damaged due to heat during cutting process. This cutting machine can set different cut
speed according to different specimen, to improve cutting specimen quality. This cutting machine have two cut type: manual cut and automatic cut. Big
square cutting chamber is more convenient for users, this is necessary specimen preparation device of metallographic test equipment in Colleges and
universities, factories and enterprises.
|Product Name||AutoCUT 150B|
|Cutting Method||Automatic, Deadweight Cutting|
|Control and Display||Film Key Operation, LCD Display|
|Speed range||200-1500 r/min|
|Input voltage||single phase 220V,50/60Hz|
|Overall Dimension||405Lx 405W x 330H mm|
|Spindle Speed||50~800 r/min|
|Cutting slice||200*12.7*0.8 mm|
PQG-25 Low Speed High Precision Metallographic Sample Cutting Machine is mainly used to cut small cylinder, square metal and electronic circuit
board materials. It adopts deadweight cutting which has a constant load and will stop automatically when the cutting is finished. To avoid burning the
sample due to overheating, diamond cut-off wheel will bring out the cooling water when cutting to cool the wheel and the sample. The surface of the
sample after cutting is bright and flat without burns, thus it is an excellent machine for cutting small material and electronic circuit boards.
Q: Are your company a trading one or a factory ?
A: We have our own factory and we have also register a trading company for more options (in order to make the business more simple) for more than 18 years focusing on test instruments field and 15 years exporting experience.