Temperature Humidity Test Equipment is used to test the material characteristic for wire type, skin type, plastic, rubber, cloth, Equiped with a special ventilation regulator for maintain the fresh air inside when heating. This testing machine design with sophisticated air-displacement adjustment device and a digital voltage meter, current meter, watt-hours, the timer can be used to measure the air replacement rate. Horizontal circulatory air supply system and both sides of airflow regulator to ensure the internal temperature uniformity and stability.
GB/T18830, ASTM D1148, ISO8580 CNS-3556,JIS-K6301,ASTM-D2436
This machine is to provide the simulative heat of the sun and ultraviolet radiation environment of space. It is used to test Yellowing for accelerated testing of materials. Gray standard available for reference pollution,determine the material level of yellowing. You can also visually observe yellowing sample rate directly. It can be used as ageing tester and ovens after taking off ultraviolet lamp.
1. Use hot wind cycle to heat;
2. Use SUS #304 stainless steel as inner material;
3. Use paint-coated processing as external material.
This machine is designed specially for drying of material which is thermo-sensitive or decompounded and oxidative easily. It can be filled with inert gases, which is especially for a rapid drying of some compound material.
|Internal size W×H×D(cm)
|External size W×H×D(cm)
|Accuracy of temperature
|Distribution of temperature
||Electronic LED digital display, automatic play several micro PID temperature controllers
||Speed of 1~10rpm, adjustable, single-deck rotating stand
||SUS mirror finished stainless steel
||Special steel, galvanized antirust processing, the senior resin coating with the lacquer that bake
|Over-temperature power-off protection, Over-temperature protection, Over-time protection
|2 groups of adjustable stainless steel layer