||#SUS 304 Stainless Steel
||80L/150L/225L/408L/800L/1000L Or Custom Made
408L stability chamber temperature and humidity,
R4O4A stability chamber temperature and humidity,
R4O4A pt100 low humidity chamber
-70 to +150C Temperature Humidity Environmental Test Climatic Chambers Temperature Humidity Test Chamber
Chamber is used to test the material characteristic for wire type, skin type, plastic, rubber, cloth, Equiped with a special ventilation regulator for maintain the fresh air inside when heating. This testing machine design with sophisticated air-displacement adjustment device and a digital voltage meter, current meter, watt-hours, the timer can be used to measure the air replacement rate. Horizontal circulatory air supply system and both sides of airflow regulator to ensure the internal temperature uniformity and stability
1. Outside SECC steel, fine powder coating treatment; Inner SUS#304 stainless steel;
2. Use new high temperature resistant long shaft motor;
3 Turbine fan;
4. Silicone forced tight;
5. Overtemperature protection, super load automatic power system;
6. Circulation system: air force level cycle;
7. Heating system:PID+S.S.R;
8. The thermostat: PID microcomputer control, automatic constant temperature, temperature quickly compensation function;
9. Timer: temperature to time, when the power failure alarm indication;
10. According to customer demand matching glass window can be customized according to customer specifications specified.
This machine is designed specially for drying of material which is thermo-sensitive or decompounded and oxidative easily. It can be filled with inert gases, which is especially for a rapid drying of some compound material.
Temp and Hum
A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C
||±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH)
||Single stage compression refrigeration
||R4O4A USA DuPont environmental protection refrigerant(R23+R404)
||Air-cooled or water-cooled
||Nickel chrome heating wire heater
||Semi-closed steam and wet
|Water Supplying Way
||Automatic cycling water supply
Q1: How can i get a quotation?
A1: Kindly provide us your details request (inner chamber size, temperature range, humidity range, power supply, product, etc.), leave us an inquiry or email and we will response promptly!
Q2: What's your temperature & humidity range?
A1: Our standards temperature range is -70℃~+180℃, 20%~98%RH.
We also can do Ultra low temperature to -190℃ .
Q3: What's your rate of heating & cooling?
A3: Our standards rate is average 3℃/min for heating, 2℃/min for cooling.
3℃/min,5℃/min,8℃/min,10℃/min,15℃/min linear or non-linear speed is available for us.
Q4: What's your warranty?
A4: 12 Months (Noted: free spares parts can be offered during warranty period, exclude consumables and man-made damages), life-time technical service