Payment & Shipping Terms:
|Salt (PH):||6.5 ~ 7.2||Copper Acetate (PH):||3.0~3.2|
|Salt Water Temp. Range:||Room Temp.~50 Degrees,+/- Degrees||Salt Spray Veicle System:||Air + Acid(base) Liquid|
|Saturated Air Pressure(kg/m):||0.8~2.0||Inner Chamber(W*H*D)::||900*500*600(mm)|
Corrosion Resistance Salt PH 6.5 Salt Spray Test Chamber With Brine Temperature 35 Degree
Salt Spray Test Chamber is specially designed for the testing of the corrosion erosion resistance of the products after their material surfaces have been treated with electric plating, anodizing, spray coating, anti-rusting oil and other anti-erosion treatment.
|Inner Box Size (L×W×H)||160×100×50 cm|
|Outside Box Size(L×W×H)||230×130×140 cm|
|Equipment Material||Both inside & outside shell adopt imported P.V.C rigid plastic board, and tank cover uses imported transparent P.V.C. rigid plastic board|
Test Chamber Temperature
|Salt Spray Method (NSS ACSS)35±1°C
Corrosion-resistant Testing Method(CASS)50±1°C
|Saturated air Barrel Temperature||Salt Spray Method (NSS ACSS)47±1°C
Corrosion-resistant Testing Method(CASS)63±1°C
|Spray Quantity||1.0~2.0 ml / 80cm2 / hr|
|PH||Salt Spray Method (NSS ACSS6.5~7.2)
Corrosion-resistant Testing Method(CASS)3.0~3.2
|Brine Tank Capacity||40L|
|Multiple Safety Protection Devices||Current discharge protection, over pressure protection,over temperature protection, over load fuse protection|
|Accessories||Testing Salt/ Measuring tank/ Equipment each 1 set|
1. Adopt automatically adding water system, can watered by itself while lack of water.
2. Precise glass spray nozzle, good uniformity, mist dropping naturally, no NaCl crystallized salt.
3. Double over-heat protection devise and alarm when water short storage to ensure use safety.
4. Local temperature and humidity inside and outside the box are used for A-level gray high-corrosive PVC, for salt spray, copper acetate, and other test specifications Test.
5. According to JIS, ASTM, CNS, GB standard parameter setting operation.Design standard:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Packaging & Shipping:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.