Capaciy: | 50L-1000L | Temperature Range:: | -70℃~+180 ℃(Air-cooled Type) |
---|---|---|---|
Humidity Range:: | 20~98%R.H | Heating Rate: | About 1.0~3.0℃/min |
Cooling Rate: | About 0.5~1.0℃/min | Temperature And Humidity Sensor: | Platinum Resistor PT100Ω/MV |
Supply Voltage: | AC220Vor 380V±10% 50±0.5Hz | Operating Ambient Temperature: | 5℃~+30℃ ≤85%R.H |
High Light: | 225L Temperature Humidity Test Chamber,AC220V Temperature Humidity Test Thermal Chamber |
50L~1000L Lab Environmental Programmable High Temp Temperature Humidity Test Thermal Chamber for Climatic Simulation
Production description
The temperature and humidity test chamber can accurately simulate the complex natural environment of low temperature, high temperature, high humidity, low temperature and low humidity, which is suitable for the product detection of plastics, electronics, food, clothing, vehicles, metals, chemicals, building materials and other industries.
Technical parameter
Model | BT-50L | BT-80L | BT-225L | BT-408L | BT-800L | BT-1000L | |
Inner chamber size (CM) | 35*45*35 | 50*40*40 | 50*60*75 | 80*60*85 | 80*100*100 | 100*100*100 | |
Power (- 40 ℃) | 4.5(KW) | 5.0(KW) | 6.0(KW) | 7.0(KW) | 8.5(KW) | 9.5(KW) | |
Performance
|
Temperature range |
A:-20℃~150℃ B:-40℃~150℃ C:-60℃~150℃ D:-70℃~150℃ E:-70℃~180℃ Customized temperature is available |
|||||
Humidity range |
20~98%R.H Customized humidity is available |
||||||
Fluctuation / uniformity | ±1.5℃/±2℃ | ||||||
Humidity deviation | ±3%R.H | ||||||
Heating rate | About 1.0~3.0℃/min | ||||||
Cooling rate | About 0.5~1.0℃/min | ||||||
Control system
|
Controller | "Temi" brand programming temperature instrument, HD real color LCD touch screen | |||||
Accuracy range |
Setting accuracy: temperature 0.1 ℃, humidity 1% R.H, Indication accuracy: temperature 0.1 ℃, humidity 1% R.H |
||||||
Temperature and humidity sensor |
Platinum resistor PT100Ω/MV | ||||||
Heating system | Fully independent system, Ni Cr alloy electric heating heater | ||||||
Humidification system | External isolation type, all stainless steel shallow surface evaporation humidifier | ||||||
Dehumidification system | Adopt the dew point temperature laminar contact dehumidification method of evaporator coil | ||||||
Water supply system | Humidification water supply adopts automatic control, and can recover residual water, save water and reduce consumption | ||||||
Refrigeration system | French "Tecumseh" totally enclosed air-cooled single-stage or cascade compressor refrigeration mode | ||||||
Circulation system | Motors with low noise and temperature resistance - multi blade centrifugal fans | ||||||
Materials
|
Outer box material | High quality carbon steel plates. Phosphorized electrostatic spray or SUS304 stainless steel | |||||
Inner box material | Stainless steel high quality mirror plate | ||||||
Thermal insulation material | Polyurethane rigid foam / superfine glass fiber wool | ||||||
Door frame insulation | Double layer high and low temperature aging resistant silicone rubber door sealing strip | ||||||
Standard configuration | Multi layer heating defrosting with lighting glass window 1 set, test sample rack 2, test lead hole 1 | ||||||
Safeguard | Leakage, short circuit, overtemperature, water shortage, motor overheating, compressor overpressure, overload, overcurrent protection | ||||||
Supply voltage | AC220Vor 380V±10% 50±0.5Hz | ||||||
Operating ambient temperature | 5℃~+30℃ ≤85%R.H |
Product Images
Company introduction
BOTO GROUP Ltd. is a private enterprise integrating r&d, production, OEM and sales of scientific and technological equipment manufacturing. Proficient in the production, development and upgrading of various non-standard instruments and automatic instruments. The factory covers an area of 26,666 square meters, headquartered in Shanghai, has several offices in China, the factory annual output of about 2000 sets of equipment. Since the establishment of the company, the company is committed to providing customers with quality products and services, and has been praised by customers.
In the domestic market, we have many end customers, third-party testing institutions, research institutes, leading enterprises in different industries, and some agents. For the overseas market, we hope to find more general agents, distributors and importers to cooperate together.
The factory has the ability to calibrate, and the customer can also designate a third party organization to calibrate and issue a calibration report.