Send Message
Contact Us
Sherry Zhang

Phone Number : +0086-13761261677

WhatsApp : +8613761261677

Manual Of Drying Oven

August 2, 2022

1. Before use, you must pay attention to whether the power supply voltage is compatible. When in use, the grounding wire of the power socket must be grounded according to the rules.

2. Do not touch the electrical part of the space on the left side of the box with your hands or wipe it with a damp cloth and rinse with water during power-on operation. The power supply should be cut off during inspection.

3. The power cord should not be wrapped around metal objects, and should not be placed in a low temperature or humid center to avoid leakage of rubber due to aging.

4. Don't overcrowd the items in the box, leave a space for natural convection of the atmosphere, so that the humid atmosphere can slow down and escape on the wind roof.

5. Check whether the silver contacts of the temperature conditioner are hairy or uneven. If so, use a fine gauze cloth to smooth the contacts before using them, and always wipe them with a clean cloth to make the contact good (note that it is necessary cut the power supply). Do not hit the metal pipes of the indoor temperature regulator so as to affect its flexibility.

6. Do not put flammable materials in a dry box without explosion-proof installation.

7. After each use, the power supply must be cut off locally and always keep the inside and outside of the box clean.