Contact Us
Sherry Zhang

Phone Number : +0086-13761261677

WhatsApp : +008613761261677

Operation steps of high and low temperature test box

June 11, 2021

1. First open the main switch of the switch and set it to ON state;

 

2. If it is a humidity test, check the water tank to see if the water level is sufficient, otherwise add water; if only high temperature test, remember to ask for gauze Take it out;

 

3. Turn on the power switch of the instrument panel;

 

4. Press the touch screen to adjust the program or set the temperature and humidity parameters, and press ENT to end the input;

 

5. Place the sample. At this time, be sure to pay attention to the volume of the box, do not put too many samples in too dense, the sample box must be separated by about 10 mm; there have been customer feedback before, and the height is being increased.