|Power::||Electronic, 220V||Usage::||Salt Spray Tester|
|Test Chamber Temperature::||NSS.ACSS 35°C±1°C/CASS 50°C±1°C||Design Standards::||GB/T 10587-2006,GB/T 10125-1997, JIS-D0201,H8502,H8610,K54|
|Test Chamber Capacity::||180L,270L,600L,1440LN Or Custom Made||Volumn::||Customize|
|Spray Quantity::||1.0~2.0ml/80cm2/h||PH::||6.5~7.2 3.0~3.2|
NSS acetic acid salt spray test,
ACSS acetic acid salt spray test,
ACSS cyclic corrosion test chamber
1. Machine material:
(A) testing room using PVC polyvinyl chloride plate (from Taiwan), acid-resisting and alkali-resisting, cleaning easier.
(B) cover of testing room using acrylic panels (imported organic glass), the thickness is 5mm.
(C) reagents added bottles attached with water gauge, cleaning easy and not easy to break.
(D) saturated air barrels is made of SUS # 304 stainless steel.
(E) testing room to adopt indexing frame, can be arbitrarily adjust the angle, Surrounded by fog and placed more piece .
2. According to CNS JIS ASTM GB2423.19 specifications, can be set constant temperature to control
(A) Salt spray test: NSS, ACSS
1. testing room : 35 ℃ ± 1 ℃
2 saturated air barrels : 47 ℃ ± 1 ℃
(B) anti-corrosion test: CASS (copper acetate)
1.testing room: 50 ℃ ± 1 ℃
2 saturated air barrels: 63 ℃ ± 1 ℃
3. Aair supply system: air pressure 1Kg/cm2 Two-stage adjustments (coarse / fine-tuning).
(A) the first paragraph for the rough adjustment 2-2.5Kg/cm2, the second paragraph to fine-tune 1Kg/cm2.
(B) Testing configuration is switch connector designed for SO2.
4. Spray form:
(A) Using Bo Nute principle to draw brine and then saline spray, atomization uniform, non-blocking and crystallization, so that ensure continuous spraying.
(B) Nozzle: The nozzle is made of special glass, adjust spray volume and spray angle.
(C) spray volume: Adjustable 1 ~ 2ml (80cm2/hr) (average of 16-hour volume).
5. Heating devices:
By direct heating, warming up faster and reduction of standby time, when the temperature arrives automatically switch ON / OFF, make temperature accuracy, low power consumption (heating tube is made of titanium alloy).
6.The control system:
(A) testing room temperature controller is the digital micro-computer products 0-99.9 ℃, liquid crystal digital display with PID automatic calculation, the control error is ± 0.3 ℃ (YANG MING6802) 1 pcs.
(B) saturated air barrels controller 0 ~ 99.9 ℃, liquid crystal digital display with PID automatic calculation, the control error is ± 0.3 ℃ (YANG MING6802) 1 pcs.
(C) safe temperature controller of heat expansion of the liquid tank 30 ~ 110 ℃ (Italy) 1 pcs.
(D) safe temperature controller of expansion of the saturated air barrel : 30 ~ 110 ℃ (Italy) 1 pcs.
(E) digital time controller 9.9s ~ 9990hr (Taiwan) 1 pcs.
(F) timer 0 ~ 9999hr (Taiwan Anliang) 1 pcs.
(G) buckle switch, continuous buckling 20000 times.
(H) 60 type, 90 type for manual flip, 120, 160, 200 type for the pneumatic cylinde automatic opening and closing.
(J) pressure gauge, (Taiwan B card).
(K) fixture bleaker (YANG MING).
(L) electromagnetic valve; (KSD).
(M) regulating valve (YIHUA).
(N) bleaker (Omron).
7.Add water systems:
Using automatic water replenishment system, automatic replenishment when the water level is too low.
8.Safe protective device:
(A) low water level, automatically cut off power supply.
(B) over-temperature, automatic cut off the power supply.
(C) attached to the safe warning light device.
|Inside box size(cm)||60x45x40||90x60x50||120x80x50|
|Outside box size(cm)||107x60x118||141x88x128||190x110x140|
|Testing room temperature||Salt test (NSS ACSS)35℃±1℃/ Corrosion Test (CASS)50℃±1℃|
|Pressure barrel temperature||Salt test (NSS ACSS)47℃±1℃/ Corrosion Test (CASS)63℃±1℃|
|Brine temperature||35℃±1℃ 50℃±1℃|
|Testing room Capacity||108L||270L||480L|
|Brine tank capacity||15L||25L||40L|
|Salt concentration||The concentration of sodium chloride 5% or the 5% concentration of sodium chloride add 0.26g per liter of copper chloride (CuCl2 2H2O)|
|Spray volume||1.0~2.0ml/80cm2/h (working at least 16 hours, and then take the average)|
|Testing room relative humidity||85% above|
|Spray form||Programmable spray (Including continuous and intermittent spray)|
BOTO GROUP Ltd. is a private enterprise integrating R&D, production, OEM and sales of scientific and technological equipment manufacturing. Proficient in the production, development and upgrading of various non-standard instruments and automatic instruments. The factory covers an area of 26,666 square meters, headquartered in Shanghai, has several offices in China, the factory annual output of about 2000 sets of equipment. Since the establishment of the company, the company is committed to providing customers with quality products and services, and has been praised by customers.
We control quality from the materials, electronic parts, controller,comppressor, solenoid valve, and many parts of the products.
1. How can we guarantee quality?
Continuous testing is performed after production is completed to ensure product stability.
All parts come from manufacturers of world-renowned brands.