|Chamber Material:||304 Stainleass Steel||Tem Fluctudtiont:||≤±0.5℃|
|Heat-up Time:||About 1-15°C/min||Pull-down Time:||About 1-15°C/min|
|Temperature Range::||-40℃~150℃ (or Customized||Usage:||Temperature Range|
|Power Supply:||AC220V 50/60Hz||Recovery Time:||Within 3 Minutes|
|Cooling Rate:||Average 1°C/min||Cooling Ratenside:||80L~1000L (be Customized)|
High low temperature test box is mainly used in the simulation to kind of product in different temperature circulation, testing
the product in the placement of set temperature over a period of time, and then observe its performance and the quality of
products, used to evaluate the performance of the sample is an essential part of the laboratory testing equipment.
can be used when constant climate conditions (temperature and/or
humidity) are needed for product testing. It also can be used for a variety of materials of high - low temperature alternating test.
The test temperature, humidity, time can be programmed. Provides conditions of temperature from -70 to +150 degree and of
humidity from 20% to 98%, low humidity 10%~98%RH is available for us.
BOTO GROUP Ltd. is a private enterprise integrating R&D, production, OEM and sales of scientific and technological equipment manufacturing. Proficient in the production, development and upgrading of various non-standard instruments and automatic instruments. The factory covers an area of 26,666 square meters, headquartered in Shanghai, has several offices in China, the factory annual output of about 2000 sets of equipment. Since the establishment of the company, the company is committed to providing customers with quality products and services, and has been praised by customers.
In the domestic market, we have many end customers, third-party testing institutions, research institutes, leading enterprises in different industries, and some agents. For the overseas market, we hope to find more general agents, distributors and importers to cooperate together.
The factory has the ability to calibrate, and the customer can also designate a third party organization to calibrate and issue a calibration report.
We control quality from the materials, electronic parts, controller,comppressor, solenoid valve, and many parts of the products.