|Chamber Material:||304 Stainleass Steel||Tem Fluctudtiont:||±2℃|
|Heat-up Time:||About 1-15°C/min||Pull-down Time:||About 1-15°C/min|
|Temperature Range::||-40℃~150℃ (or Customized||Usage:||Temperature Range|
|Power Supply:||AC380V 50/60Hz||Recovery Time:||3-5 Minutes|
|Cooling Rate:||Average 1°C/min||Cooling Ratenside:||80L~1000L (be Customized)|
1.The constant temperature and humidity test box is mainly composed of control panel, distribution panel, insulation layer, air
supply fan, heater, humidifier and refrigeration unit. The main specifications can be divided into 6 standard sizes and 10
specifications under different conditions.
2.The controller can be connected to the computer through LAN interface. Users can design programs on the computer screen,
collect test data and records, call program execution, remote control machine switch and other functions.
3.The use of multi-wing air supply fan strong air circulation, to avoid any dead angle, so that indoor temperature and humidity
distribution is uniform.
4.Complete safety protection device, if abnormal conditions occur, the controller screen will automatically display the fault
status, cut off the power switch, and provide troubleshooting methods.
BOTO GROUP is a professional manufacturer of various kinds of testing equipment over 20 years. BOTO products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
BOTO deals with customers from more than 150 countries and regions. Meanwhile, we are committed to cooperate with different dealers in different countries and regions in order to offer better service. Our mission is to help every customers establish testing labs to ensure the quality of their products.
Our company will continue to develop, innovate and keep faith. We combine with the international testing standards and the specific demands of customers that may establish a new banner in Chinese testing industry.
The factory has the ability to calibrate, and the customer can also designate a third party organization to calibrate and issue a calibration report.
We control quality from the materials, electronic parts, controller,comppressor, solenoid valve, and many parts of the products.