| Accuracy: | ±0.5°C, ±2.5%RH | Heating Rate:: | ≤3°C/min |
|---|---|---|---|
| Resolution:: | ±0.01°C, ±0.1%R.H | Compressor:: | French Tecumseh |
| Customized Support:: | OEM, ODM | Refrigerant:: | R23/R404A |
| Cooling Rate:: | Average 1°C/min | Operating Interface:: | Touch Screen |
| Highlight: | SUS304 Walk In Climatic Chamber,R404A Walk In Climatic Chamber,Touch Screen Walk In Climatic Chamber |
||
BOTO Environmental laboratory climate Test Walk In Climatic Chamber Temperature And Humidity Equipment Walk In Test Chamber
It is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, suitable for quality control of the industries of electron, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
| System | Balanced Temperature & Humidity Control System |
| Temp. range | -70°C~150°C |
| Humid. range | 20 ~ 98 percent R.H. |
| Temp. & Humid. accuracy | ± 0.3°C; ± 2 percent R.H |
| Temp. & Humid. regularity | ± 1°C; ± 3 percent RH |
| Resolution | 0.1°C, 1 percent, P.I.D control |
| Heating up | -40°C ~ +100°C within 45 min |
| Heating down | 20°C~ -20°Cwithin 40min |
| Interior dimension(W×D×H) | 60×80×85cm |
| Exterior dimension(W×D×H) | 120×135×175cm |
| Interior material | Stainless steel plate(SUS304) |
| Exterior material | Stainless steel plate(SUS304) |
| Insulation | Rigid foam |
| Refrigeration system | Air cooled, Hermetic compressor, single stage refrigeration system. |
| Display | LCD |
| Safety devices | No fuse breaker refrigerator over load relay, Refrigeration High pressure Switch, Over Temp, Protector, Protection relay, Protection fuse, Water Lever protector, Overheat protector, Alarm |
| Accessories | Viewing window, Shelves (freely adjustable 2 pcs.), Cable port(Ø50mm)Chamber lamp. |
| Weight | Approx. 400kg |
| Power | AC220V±10 percent 50/60Hz |