|Light Temperature Range::||50 ℃ ~ 70 ℃ / Temperature Tolerance Of ± 3 ℃||Condensing Temperature Range::||40 ℃ ~ 60 ℃ / Temperature Tolerance Of ± 3 ℃|
|Temperature Control::||PID Self-tuning Temperature Control Mode||Power::||Electronic|
|Temperature Resolution::||0.1 ℃||Blackboard Thermometer Measuring Range::||30 ~ 80 ℃ / Tolerance Of ± 1 ℃|
|Humidity Range::||About 45% ~ 70% R.H||Standard Specimen Size::||75 * 150mm 48pcs|
Solar Radiation Environmental Test Chambers,
UV Weathering Environmental Test Chambers,
SUS304 Aging Test Chamber
Simulate Solar Radiation UV Weathering Testing Machine /UV Aging test Chamber
UV aging testing chamber is applicable for the sunlight resistant test of nonmetallic materials and aging test of artificial light sources. A variety of industrial products can make the reliability test, and this product can simulate the product in the sun, rain, humidity and dew conditions, including damage caused by bleaching, color, brightness down, powder, crack, blur, brittle, intensity decreased and oxidation.
1. Simulate the sun, rain spray and condensation resulting damage to test the materials by exposure to sunlight with moisture and temperature.
2. To get the results of damage after several days or weeks which is equal to expose to outside for a few months. The damages include fading, discoloration, brightness down, powder, crack, blur, brittle, strength decreases and oxidation.
3. Provide reference with testing data for improvement of existing materials, or to assess the impact of changes in product durability and other aspects.
ISO 4892-3,ASTM G154....
The main technical parameters:
|Chamber dimension (W*D*H)||1300*500*1460mm|
|Chamber material||SUS#304 stainless steel|
|Temperature range||RT to 70℃|
|Controller||Programmable controller, LCD touch screen|
|Control mode||Balance temperature humidity control (BTHC)|
|Test cycle setting||Exposure, condensation and water spray test cycle is programmable|
|Water spray cycle||Spray 18mins in every 120mins / spray 12mins in every 60mins|
|Distance from sample to lamp||55±2mm|
|Centre distance between lamps||65~70mm|
|UV lamps||Imported Atlas UV-A: 315-400nm (8pcs, 1600h lifetime)|
|Specimen Size||75×290mm (24pcs) / 75x150mm (48pcs), maximum thickness 5mm|
|Testing time||0~999H, adjustable|
Overload short circuit protection
Over temperature protection
Water lacking protection
Earth leakage protection
Auto shut off protection
BOTO GROUP Ltd. is a private enterprise integrating R&D, production, OEM and sales of scientific and technological equipment manufacturing. Proficient in the production, development and upgrading of various non-standard instruments and automatic instruments. The factory covers an area of 26,666 square meters, headquartered in Shanghai, has several offices in China, the factory annual output of about 2000 sets of equipment. Since the establishment of the company, the company is committed to providing customers with quality products and services, and has been praised by customers.
The company's main products cover high and low temperature cycle test chamber, rapid temperature change test chamber, temperature impact test chamber, high altitude and low pressure test chamber, temperature/humidity/vibration three comprehensive test chamber, constant temperature and humidity test chamber, Rain, sand, light, salt spray environment simulation system, vehicle climate environment simulation and testing system, multi-factor environment simulation system and a variety of non-standard test system, has a number of technical patents, through the ISO9001:2015 quality management system certification, can produce in line with MIL, IEC, DIN and other international standards of environmental testing equipment. Products are widely used in national key laboratories and large third-party testing laboratories, involving aviation, aerospace, weapons, ships, automobiles, intelligent manufacturing, new energy, metering,electronics, railway, electric power, medical and scientific research institutions and many other key fields of the national economy.
Main equipment include:
In the domestic market, we have many end customers, third-party testing institutions, research institutes, leading enterprises in different industries, and some agents. For the overseas market, we hope to find more general agents, distributors and importers to cooperate together.
Honor and certification
The factory has the ability to calibrate, and the customer can also designate a third party organization to calibrate and issue a calibration report.
During the whole business process, we offer Consultative Selling service.
1) Customer inquiry process:
Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2) Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.
3) Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photos to show production process.
After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
4) Installation and after sale service:
Defines installing those products in the field and providing after-sales support.