Electronic Product Power Supply Burn In Aging Test Chamber for PCB Test

Basic Information
Place of Origin: China
Brand Name: BOTO
Certification: CE ISO
Minimum Order Quantity: 1set
Price: Negotiated
Packaging Details: wooden case
Delivery Time: 1-15 days,to be negotiated
Payment Terms: T/T
Supply Ability: 300 Piece/Pieces per Year
Tem.Constancy:: +-0.5℃ Temp.Deviation:: +-2.0℃
Tem.Range:: RT~100℃ Heat Up Time:: RT~100℃ Within 55min
The Size:: Double Deck Glass ChanMen Type(80*210cm)/Double Type System:: LCD Screen Display
Certification:: Reach/IECEE Packaging Details: Each Set Protected With Resin Fiber And PP Film, Then Put Into Strong Wooden Case With Operation Manual.
High Light:

PCB Burn In Aging Test Chamber

,

Reach Certification Burn In Aging Test Chamber

,

IECEE Burn In Test Equipment

Electronic Product Power Supply Burn In Aging Test Chamber for PCB Test

 

Product Description

 

Product Application

Burn-In aging test chamber is widely used in power electronic, computer, communication, biological pharmacy and other industries.

Standard:
GB/T 2423.2-2001 Test B: high temperature test method
GJB 150.3-1986 high temperature test
SPECIFICATIONS
Model
REO/REZ
System
Balanced temperature control system (BTC)
No-load temperature range
RT +10 °C ~ +100 °C (common temperature +10 °C ~ 65 °C)
Temperature fluctuation
≤ ± 1 °C
Temperature uniformity
± 3.0 °C (empty Containing a constant temperature test)
Heating time
from RT to +60 °C takes about 20 minutes (no load)
Inner material
color steel plate surface spray treatment
Outer material
201# stainless steel plate
Insulation material
24K glass rock wool (flame retardant, fireproof)
Controller
7-inch HR-U800 intelligent touch-type temperature controller
Heater
Fin-type heat pipe nickel-chromium U-type high-efficiency heater
Intake/exhaust
Each independent box φ60cm Inlet valve number 1 (adjustable intake air volume), each independent Φ60cm exhaust valve box number 1 (reserve exhaust pipe interface, to facilitate the customer to take the exhaust gas out of the room)
Temperature measuring body
Thermal resistance type PT100 sensor
Power
AC 380V 50HZ 3 phase 4 wires+ground wires
Remarks
Can accept OEM/ODM
Electronic Product Power Supply Burn In Aging Test Chamber for PCB Test 0
Electronic Product Power Supply Burn In Aging Test Chamber for PCB Test 1
Electronic Product Power Supply Burn In Aging Test Chamber for PCB Test 2
Electronic Product Power Supply Burn In Aging Test Chamber for PCB Test 3

Main Features

1. Applicable aging switch power products.
2. Instant control of product aging and accurate screening of aging products.
3. Each of the tested products is equipped with status indicators, trolley panel and computer monitor interface dual indications.
4. Computer monitor interface can view voltage and current data in real time.
5. Computer program to set aging parameters, can be digitally set.
6. Aging mode selection: With CC, CV mode selection.
7. The aging data can be recorded and stored, and the aging data can be exported for analysis.
8. The aging time of the product can be set. The system ends the aging in a countdown manner and automatically cuts off the power.
9. The number and time of the product's AC power interruption can be arbitrarily set.
10. The load module adopts imported MCU.
11. Casters installed, easy to move and flexible.

Our Service
Electronic Product Power Supply Burn In Aging Test Chamber for PCB Test 4
Electronic Product Power Supply Burn In Aging Test Chamber for PCB Test 5

Pre-Sales Service

* Inquiry and consulting support.

* Sample testing support.

* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine.

* Engineers available to service machinery overseas.

If you meet any problems in future during testing process, we promise we will give you a reply within 48 hours and solution provide within 3 working days. If customers require on-site service, the transport and travel expense shall be borne by customer.

Packing & Delivery
Electronic Product Power Supply Burn In Aging Test Chamber for PCB Test 6

 

Company introduction

 

BOTO GROUP Ltd. is a private enterprise integrating r&d, production, OEM and sales of scientific and technological equipment manufacturing. Proficient in the production, development and upgrading of various non-standard instruments and automatic instruments. The factory covers an area of 26,666 square meters, headquartered in Shanghai, has several offices in China, the factory annual output of about 2000 sets of equipment. Since the establishment of the company, the company is committed to providing customers with quality products and services, and has been praised by customers.

 

Electronic Product Power Supply Burn In Aging Test Chamber for PCB Test 7

 

In the domestic market, we have many end customers, third-party testing institutions, research institutes, leading enterprises in different industries, and some agents. For the overseas market, we hope to find more general agents, distributors and importers to cooperate together.

 

Electronic Product Power Supply Burn In Aging Test Chamber for PCB Test 8

 

The factory has the ability to calibrate, and the customer can also designate a third party organization to calibrate and issue a calibration report.

 

 

Contact Details
BOTO

Phone Number : +8613761261677

WhatsApp : +008613761261677