Pharmaceutical Laboratory And Pharmaceutical Factory Medicine Stability Testing Chamber

Basic Information
Place of Origin: China
Brand Name: BOTO
Certification: CE ISO
Minimum Order Quantity: 1set
Price: Negotiated
Packaging Details: wooden case
Delivery Time: 5-25 days
Payment Terms: T/T
Supply Ability: 100 Unit/Units per Year
Temperature Range:: 10-60 Degree Centigrade Humidity Range:: 40-90% R.H
Temperature + Humidity Sensors:: Combination Type Of T + RH Sesnsors Temperature Accuracy:: ± 0.5 Degree Centigrade Or Better
Humidity Accuracy:: ± 5% Rh Fabricated From:: Pre-Fabricated S.S. - 304 Puff Panels
Body Insulation:: 75 Mm To Prevent Thermal Leakage Controller:: Touch Screen HMI & PLC Controller
High Light:

CE Certified Medicine Stability Testing Chamber

,

Touch Screen Pharmaceutical Stability Testing Chamber

Pharmaceutical laboratory and pharmaceutical factory medicine stability testing chamber

 

Introduction

EIE Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.

Salient Features

  • CE Certified
  • Light weight Sandwich panel
  • Fulfills storage conditions of 25° C - 60% RH, 40° C - 75% RH, 30° C - 65% RH, 25° C - 40% RH, 30° C - 35% RH
  • Designed for testing product shelf – life, packing and electronic test.
  • Specially designed to meet ICH, WHO & USFDA requirements.
  • Main Door with observation window to inspect samples
  • Electrical wiring as per CE Compliances
  • Illuminated Working area
  • Password protected door access and monitoring
  • U-Shaped tubular heaters as heating element.
  • Non Condensing steam injection type humidity system with standby heater & auto switch over
  • Mains-Fail Detection & Automatic Change Over to Battery/Inverter
  • High speed Ethernet communication
  • Uniformity module with 4 + 4 RH & Temp Sensors
  • Forced air circulation for uniform temperature and RH Distribution
  • Ensures smooth air-flow pattern to improve the Temp & Humidity distribution across the chamber
  • GSM module for SMS Alert (Optional)
  • Serial port for PC interface with 21-CFR Compliant software (Optional software)
  • Standby Humidity control system and Standby refrigeration system (Optional)

Humidity System

Non-condensing type Steam injection system & reservoir tank with water level arrangement with indicator.

Cooling System

Hermetically sealed compressor, which is CFC free and eco-friendly, utilizes the refrigerant (R-134A gas) to maintain chamber temperature within specified range.

Technical Specifications

  • Temperature Range: 20 °C to 70 °C
  • Temperature Accuracy: ± 0.2 °C
  • Temp Uniformity: ± 1°C
  • RH Range: 40% RH to 95% RH
  • RH Accuracy: ± 2% RH
  • RH Uniformity: ± 3% RH

As per ICH Guidelines

  • At 25°C: RH = 60%
  • At 30°C: RH = 65%
  • At 30°C: RH = 75%
  • At 40°C: RH = 75%
 

Trays for samples

  • Removable perforated trays
  • Can withstand heavy load
  • Offer better air circulation

Safety Features

  • High temperature safety cut off
  • Low water level boiler cut off
  • Electrical overload cut off
  • Time delay for compressor switch ON
  • Electrical circuit breaker

Optional accessories at extra cost

  • 21-CFR Compliance software with PC Communication
  • Highly advanced HMI & PLC Control system
  • GSM Alert through SIM Card
  • Data logger with 4 temperature + 4 Humidity sensors
  • Spare RH Sensor for validation purpose
  • Spare PT-100 Sensor for validation purpose
  • Standby Humidity System
  • Standby Refrigeration System
  • Biometrics Magnetic Door Access for Secured Door opening with software to maintain log
  • On-Site Validation (mapping) for 24 hours on Empty, Half and Full load condition
  • Selection Guide
Working chamber sizes (Meter) (W X D X H) Volume (Liters) No of trays Product codes
2.0 x 1.0 x 2.0 4000 8 EIE-106WG40
2.0 x 1.5 x 2.0 6000 12 EIE-106WG60
2.0 x 2.0 x 2.0 8000 24 EIE-106WG80
2.0 x 2.5 x 2.5 12500 28 EIE-106WG125
2.5 x 3.0 x 2.5 18750 36 EIE-106WG187
3.1 x 3.0 x 2.5 23250 40 EIE-106WG232
3.7 x 3.5 x 2.5 32500 66 EIE-106WG325
3.9 x 3.9 x 3.0 45000 84 EIE-106WG450
3.85 x 5.2 x 2.5 50000 100 EIE-106WG500
6.4 x 5.0 x 2.5 80000 200 EIE-106WG800

W : Walk-In | G : GMP | P : Powder coating

Note: Other sizes are available on request.

 

Company profile

BOTO GROUP Ltd. is a private enterprise integrating r&d, production, OEM and sales of scientific and technological equipment manufacturing. Proficient in the production, development and upgrading of various non-standard instruments and automatic instruments. The factory covers an area of 26,666 square meters, headquartered in Shanghai, has several offices in China, the factory annual output of about 2000 sets of equipment. Since the establishment of the company, the company is committed to providing customers with quality products and services, and has been praised by customers.

 

Pharmaceutical Laboratory And Pharmaceutical Factory Medicine Stability Testing Chamber 0

 

In the domestic market, we have many end customers, third-party testing institutions, research institutes, leading enterprises in different industries, and some agents. For the overseas market, we hope to find more general agents, distributors and importers to cooperate together.

 

Pharmaceutical Laboratory And Pharmaceutical Factory Medicine Stability Testing Chamber 1

 

The factory has the ability to calibrate, and the customer can also designate a third party organization to calibrate and issue a calibration report.

 

 

Contact Details
BOTO

Phone Number : +8613761261677

WhatsApp : +008613761261677