Temperature Range: | (Low Temp.:A:+25℃; B:0℃;C:-20℃; D:-40℃; E:-60℃; F:-70℃) (High Temp.: + 150℃) | Humidity Range: | 20%~98% R.H |
---|---|---|---|
Temp Analytic Accuracy/ Uniformity: | 0.1℃/±2.0℃ | Temperature Fluctuation: | ±0.5℃ |
Humidity Control Accuracy: | ±0.1%;±2.5% | Heat, Cooling Time: | Heat Up About 4.0°C/min ; Cooling About 1.0°C/min |
Compressor: | Original France“Tecumseh”brand | Controller: | Taiwan, Independent R&D Software |
High Light: | AC380V Programmable Temperature Humidity Chamber,SUS304 Temperature And Humidity Test Chamber |
Programmable Temperature Humidity Climate Test Chamber Price
Describe purpose
This test chamber provides high temperature, low temperature, high humidity, low humidity simulation environment, to test the rubber, plastic, electronic products before and after the test material and strength reduction degree.The machine can also simulate the container environment to detect the fading and shrinkage of rubber and plastic under high temperature and humidity.Test heat, cold, dry and moisture resistance of various materials.Suitable for electronic, electrical, batteries, universities, research institutes, inspection and quarantine bureau, paper products, food, vehicles, auto parts, metal, chemical, building materials and other industries factory unit quality control testing.
Design Standard:
GB11158 | High Temperature Test Chamber Technical Condition |
GB10589-89 | Low Temperature Test Chamber Technical Condition |
GB10592-89 | High-low Temperature Test Chamber Technical Condition |
GB/T10586-89 | Damp Heat Test Chamber Technical Condition |
GB/T2423.1-2001 | Low Temperature Test Chamber Test Methods |
GB/T2423.2-2001 | High Temperature Test Chamber Test Methods |
GB/T2423.3-93 | Damp Heat Test Chamber Test Methods |
GB/T2423.4-93 | Alternating Damp-Heat Test Methods |
GB/T2423.22-2001 | Temperature Changing Test Methods |
IEC60068-2-1.1990 | Low Temperature Test Chamber Test Methods |
IEC60068-2-2.1974 | High Temperature Test Chamber Test Methods |
GJB150.3 | High Temperature Test Methods |
GJB150.4 | Low Temperature Test Methods |
GJB150.9 |
Damp Heat Test Methods |
Uses:
This equipment can simulate different environment condition. It's appropriate for testing material performance, such as resist heat, resist dry,resist humidity and resist cold. That can define performance of material.
Programmable Temperature Humidity Climate Test Chamber Price
Specification
Model | BT-B-80 (A~F) |
BT-B-150L (A~F) |
BT-B-225L (A~F) |
BT-B-408L (A~F) |
BT-B-800L (A~F) |
BT-B-1000L (A~F) |
Inner size: WHD(cm) | 40*50*40 | 50*60*50 | 60*75*50 | 60*85*80 | 100*100*80 | 100*100*100 |
External size: WHD(cm) | 105*165*98 | 105*175*108 | 115*190*108 | 135*200*115 | 155*215*135 | 155*215*155 |
Temperature range | (Low temp.:A:+25℃; B:0℃;C:-20℃; D:-40℃; E:-60℃; F:-70℃) (High temp.: + 150℃) | |||||
Humidity range | 20%~98% R.H | |||||
Temp analytic accuracy/ uniformity |
0.1℃/±2.0℃ | |||||
Temperature Fluctuation | ±0.5℃ | |||||
Humidity control accuracy | ±0.1%;±2.5% | |||||
Heat, cooling time | Heat up about 4.0°C/min ; Cooling about 1.0°C/min | |||||
Inner and outer materials | SUS#304 Stainless steel for inner chamber ; Carton Advanced cold plate nano paint for outer | |||||
Insulation materials | Resistant to high temp ,high density,formate chlorine,ethyl acetum foam insulation materials | |||||
Cooling system |
Air cooling/single segment compressor(-40°C) ,air and water double segment compressor (-50°C~-70°C) |
|||||
Protection devices |
Fuse switch, compressor overload switch, refrigerant high and low pressure protection switch, super humidity over-temperature protection switch, fuse, failure warning system |
|||||
Parts | Watching window , 50mm testing hole , PL internal bulbs , Wet and dry bulb gauze , partition plate , castorx4, Foot Cupx4 | |||||
Compressor | Original France“Tecumseh”brand | |||||
Controller | Taiwan, Independent R&D software | |||||
Power | AC220V 50/60Hz & 1 , AC380V 50/60Hz 3 | |||||
Weight (kg) | 170 | 220 | 270 | 320 | 450 | 580 |
Company profile
BOTO GROUP Ltd. is a private enterprise integrating r&d, production, OEM and sales of scientific and technological equipment manufacturing. Proficient in the production, development and upgrading of various non-standard instruments and automatic instruments. The factory covers an area of 26,666 square meters, headquartered in Shanghai, has several offices in China, the factory annual output of about 2000 sets of equipment. Since the establishment of the company, the company is committed to providing customers with quality products and services, and has been praised by customers.
In the domestic market, we have many end customers, third-party testing institutions, research institutes, leading enterprises in different industries, and some agents. For the overseas market, we hope to find more general agents, distributors and importers to cooperate together.
The factory has the ability to calibrate, and the customer can also designate a third party organization to calibrate and issue a calibration report.