|Inner Size: WHD(cm):||40*60*45||External size: WHD(cm):||72*175*108|
|Temperature Range:||(A:0℃;B:-20℃; C:-40℃;D:-60℃;E:-70℃) (High:+100℃/+150℃/+180℃)||Humidity range:||20%~98% R.H. Or 10%~98%R.H|
|Temperature Uniformity:||±1.0℃||Temperature Fluctuation:||±0.5℃|
|Heat; Cooling time:||Heat Up About 4.0°C/min ; Cooling About 1.0°C/min||Insulation materials:||Resistant To High Temp ,high Density,formate Chlorine,ethyl Acetum Foam Insulation Materials|
Programmable Environmental Temperature Chamber,
Lab Climatic Simulation Humidity Test Chamber,
Temperature Benchtop Thermal Chamber
Lab Climatic Simulation Programmable High And Low Temperature Thermal Test Chamber
Environmental Constant Temperature Humidity Climatic Test Chamber applied to control the product
quality, such as electronic, plastic products, electrical appliances, instruments, food, vehicles, metals,
chemicals, building materials, aerospace, medical care and so on.
1. To simulate test environment with different temperature and humidity
2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
4. Uncover test unit weakness in a short-term test with accelerated time effect
High performance and quiet operation (65 dBa)
Space-saving footprint, designed for flush installation to wall
Stainless steel exterior
Full thermal break around doorframe
One 50mm (2") diameter cable port on left, with flexible silicone plug(special requirement)
Three levels of overheat protection, plus overcool protection
Easy lift-off service panels, electrical access on left
Detachable eight-foot power cord with plug
Direct water supply connection for continuous operation (supply tank optional)
ETL listed electrical panel conforming to UL 508A
During the whole business process, we offer Consultative Selling service.
1) Customer inquiry process:
Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2) Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.
3) Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photos to show production process.
After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
4) Installation and after sale service:
Defines installing those products in the field and providing after-sales support.