1. Spray method: A: continuous spray B: programmable spray.
2. Adopt a full detection system, which can be lighted when a fault occurs.
3. The whole set is made of imported PVC board, the structure is strong, never deformed, and it is resistant to acid and alkali and high temperature and never aging.
4. Adopt automatic/manual water adding system, with the function of automatic/manual water adding when the water level is insufficient, the test will not be interrupted, and the water level will be alarmed when the water level is insufficient.
5. Quartz glass nozzle, the mist diffuses evenly, and falls naturally on the test piece without blocking by crystalline salt.
6. The controllers are all on the same board, easy to operate and clear at a glance.
7. With double over-temperature protection, warning of insufficient water level to ensure safe use.
8. The imported temperature controller has manual and fully automatic control methods, using digital display, PID control, error ± 0.1 ℃, the maximum setting time can reach 999HrS.
9. The laboratory adopts direct steam heating method, the heating speed is fast and uniform, and the standby time is shortened.
10. The spray tower is equipped with a conical diffuser, which has the functions of guiding the mist, adjusting the amount of mist and evenly falling the mist.
11. The pressure barrel adopts Henry's law to heat and humidify.
12. The upper cover of the test tank is automatically opened and closed by a pneumatic cylinder, which is easy to operate and has good safety.
13. After the test is completed, it has an automatic defogging device to clearly observe the test products in the test room.
Your message must be between 20-3,000 characters!
