Tensile strength testing machine/universal tensile tester/tensile tester
The machine is designed by mechanical-electrical integration, composition of the force-measuring sensor, transmitter, microprocessor, mechanism of load drive, computer and color inkjet printer. High-precision electronic motor can be set to five-speed, the components are connected by plug-way, Floor-standing models, it is taken account of modern industrial design and ergonomics in modeling and coating. It can be tested all the materials in stretch, compression, bending, shear, embedded relay, peeling, tearing, crack, etc,such as rubber, plastics, leather, metal, nylon wire, fabric, paper, aerospace, packaging, construction, petrochemical, electrical, vehicle, etc.
The implementation of standards and standard configuration:
1. GB/T4689.20-1996 Measuring fastness of leather’s adhesion
2. QB/T2710-2005 Measuring leather’s expansion and the rate of elongation
3. QB/T2711-2005 measuring tear force of leather
4. QB/T2712-2005 measuring leather’s strength and stretch of spherical crack test
A. High-precision sensor 1ton from U.S.A. Accurate Forces within ± 0.5%.
B. High-precision 24 bits A / D, sampling frequency 200Hz.
C. Power System: Panasonic AC Servo Motor + Driver + CAVEX + precision ball screw.
D. Control System: it is more precise using Pulse Command control modem, the range in speed control is 0.01 ~ 250 mm / min.the board of iron can be adjust to fast and slow by the control board. it is automatically saved after testing.
E. Data transmission: RS232 Transfer.
F. Display: windows XP test software.
G. Easy to control five speed and calibration system.
H. Test software can precision control in position, speed, rate of load force and rate of stress, satisfy the different requirements of test.
I. Test space: Testing width is about 400 mm (standard), moving space of active iron 1000mm. (excluding fixtures)
J. Displacement: coder 2500 P / R, increase four-time accuracy. adopt Japanese Lejing coder that has strong anti-jamming capability, displacement resolution 0.001mm.
Small deformation: Metal extensometers, parsing 0.001mm.
K. Safe equipment : the system would shut down if overload or over-trip
||5KN, 10kN, 20kN, (option)
||1 % /0.5 %
|Effective measuring range
||Display the value ±1%/Display the value±0.5%
||Max load 1/200000
||Basic configuration: sensor(max load): one
|Extended configuration: can add more sensors
|Effective testing width
||390mm (or customize)
|Effective Tensile stroke
|Accuracy of displacement measurement
||Tolerance: ±0.5%/ tolerance: ±0.2%
|Accuracy of measured deformation
||Tolerance: ±0.5% (according to requirement of customer
to choose the larger or small deformation)
|Testing platform moving device
||Fast /slow two speeds to control, can jog
||Overload 10%, automatic protection
||A set of tensile fixture
||Panasonic AC Servo Motor + Driver + high-precision ball screw
||0.4KW (depends on the force)
||about 250 Kg
||Kg, N, LB, TON can be exchanged.
BOTO Testing equipment Technology Co., Ltd is a high technology supported production-oriented enterprise who specializes in developing, manufacturing, marketing all kinds of environmental equipment. Our company has advanced technology, experienced technical management personnel and efficient professional service staffs, fine quality management and perfect after-sales service system.
Our company mainly produce simulated environmental tester, plastic and rubber tester etc. on all kinds of materials testing industries. The production base is located in the country’s manufacturing center Dongguan, Guangdong province, China. In order to service our customers better in terms of reducing costs and early delivery, in 2005 we had set up an office in Kunshan, Jiangsu province for Eastern China marketing and servicing.
BOTO deals with customers from more than 150 countries and regions. Meanwhile, we are committed to cooperate with different dealers in different countries and regions in order to offer better service. Our mission is to help every customers establish testing labs to ensure the quality of their products.
Our company will continue to develop, innovate and keep faith. We combine with the international testing standards and the specific demands of customers that may establish a new banner in Chinese testing industry.
During the whole business process, we offer Consultative Selling service.
1) Customer inquiry process:
Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2) Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.
3) Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photos to show production process.
After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
4) Installation and after sale service:
Defines installing those products in the field and providing after-sales support.