Temperature Humidity Test Equipment is used to test the material characteristic for wire type, skin type, plastic, rubber, cloth, Equiped with a special ventilation regulator for maintain the fresh air inside when heating. This testing machine design with sophisticated air-displacement adjustment device and a digital voltage meter, current meter, watt-hours, the timer can be used to measure the air replacement rate. Horizontal circulatory air supply system and both sides of airflow regulator to ensure the internal temperature uniformity and stability.
1. It mainly used in testing the performance of the aircraft industry, information electronic instruments and meters, material, the electrician, electronic products, components and so on.
2. With CNC machine tool, elegant appearance and high strenth PU heat-perservation material.
3. Large windows glass design, Comprehensive view, with inner lighting so it's convenient to watch the situation at any time during whole test.
4. With LCD screen in both Chinese and English, easy permance and program.
5. The system between the heating and cooling fully independent to increase effectiveness and life span and decrease the test cost and failure rate.
1. Outside SECC steel, fine powder coating treatment; Inner SUS#304 stainless steel;
2. Use new high temperature resistant long shaft motor;
3 Turbine fan;
4. Silicone forced tight;
5. Overtemperature protection, super load automatic power system;
6. Circulation system: air force level cycle;
7. Heating system:PID+S.S.R;
8. The thermostat: PID microcomputer control, automatic constant temperature, temperature quickly compensation function;
9. Timer: temperature to time, when the power failure alarm indication;
10. According to customer demand matching glass window can be customized according to customer specifications specified.
This machine is designed specially for drying of material which is thermo-sensitive or decompounded and oxidative easily. It can be filled with inert gases, which is especially for a rapid drying of some compound material.
|Temp and Hum Range
A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C
||±0.5°C-±2°C ±3%RH(>75%RH); ±5%RH(≤75%RH)
|Wind Cycling Way
||Centrifugal fan-broadband type forced air circulation
||Single stage compression refrigeration
||R4O4A USA DuPont environmental protection refrigerant(R23+R404)
||Air-cooled or water-cooled
||Nickel chrome heating wire heater
||Semi-closed steam and wet
|Water Supplying Way
||Automatic cycling water supply