|Product Name:||Environmental Simulate Test Chamber||Model:||B-TH-504|
|Internal Measurement:||70*90*80 CM||External Measurement:||100*180*103 CM|
|Humidity Range:||20%-98% RH||Heat Up Time(min):||About 3-5°C|
|Pull Down Time:||About 0.7°C-1°C/min||Temperature Range:||-70°C-150°C|
|Temp&Humi Deviation:||±1°C/ ±3% RH||Interior Material:||SUS# 304stainless Steel Plate|
|Exterior Material:||Cooling Or SUS# 304 Stainless Steel Plate|
Brake Pads Environmental Test Chambers,
SUS304 Environmental Test Chambers,
504L Environmental Test Chambers
Environmental Simulate High And Low Temperature Test Chamber Brake Pads Hardener Test Machine
Mainly used for national defense industry, aviation industry, automotive parts, electronic parts, plastic industry, food industry, pharmaceutical industry, and related product research and development, quality management engineering test specification.
1. The international famous brand imported compressor and refrigeration accessories are adopted to ensure the stability of the refrigeration system.
2. Can show the cause of the fault, easy to eliminate.
3. Special air supply circulation design, good uniformity of temperature and humidity distribution.
4. Full series of imported microcomputer controller, color touch screen, Chinese and English voice display.
5. Super silent design, effectively reduce the noise of equipment operation.
6. Multiple safety protection, refrigerant high voltage protection, compressor overload protection, current overload protection, overtemperature protection, leakage protection.
|Product name||Environmental simulate test chamber|
|Inner box volume||504L|
|Internal measurement||70* 90*80 CM|
|External measurement||100* 180* 103 CM|
|Humidity Range||20%-98% RH|
|Heat up time||About 3-5°C|
|Pull Down time||About 0.7°C-1°C/min|
|Temp&Humi deviation||±1°C/ on: ±3% RH|
|Interior material||SUS# 304stainless steel plate|
|Exterior material||Cooling or SUS# 304 Stainless steel plate|
1. External coating: box RAL7047, decorative color RAL5015 for control area
2. The internal experiment space is composed of 304 stainless steel plates.All joints are seamlessly welded and vapor free.
3. Pressure balance valve: the box body is equipped with a pressure balance system, equipped with a shaking valve, when the internal pressure of the box body and the outside pressure difference when the automatic balance.
3. Air handling system: it is attached to the back wall in the box body, which contains the following components: cold and heat exchanger, heating exchanger, humidification into the pipeline, dehumidification coil, heat-regulated air recirculation fan, temperature and humidity sensor.The thermally regulated air flows into the air handling unit and is treated by each of the components mentioned above before entering the test chamber.
4. Moisture removal system: Use the flat pipe ring connected to the refrigeration system to achieve.
5. Internal air circulation: the external extended shaft motor drives the internal fan to realize forced circulation convection.
6. Humidification system: it is completed by low-pressure steam generator with electronic heater, equipped with water softener and heating pipe, which can realize automatic water replenishing.
· To simulate test environment with different temperature and humidity
· Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test,moistening test and drying test…
· Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
· Uncover test unit weakness in a short-term test with accelerated time effect
3.CHAMBER DESIGN FEATURES
· High performance and quiet operation (68 dBA)
· Space-saving designed for flush installation to wall
· Full thermal break around doorframe
· One 50mm diameter cable port o left, with flexible silicone plug
· Direct water supply connection for continuous operation
· Accurate wet/dry-bulb humidity measurement system for easy maintain
· PIC controller for test chamber
· Step types include: ramp, soak, jump, auto-start, and end
· RS-232 interface to connect computer for output
We control quality from the materials, electronic parts, controller,comppressor, solenoid valve, and many parts of the products.
BOTO GROUP is a professional manufacturer of various kinds of testing equipment over 20 years. BOTO products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
BOTO deals with customers from more than 150 countries and regions. Meanwhile, we are committed to cooperate with different dealers in different countries and regions in order to offer better service. Our mission is to help every customers establish testing labs to ensure the quality of their products.
Our company will continue to develop, innovate and keep faith. We combine with the international testing standards and the specific demands of customers that may establish a new banner in Chinese testing industry.
The factory has the ability to calibrate, and the customer can also designate a ISO 17025 accredited third-party organization to calibrate and issue a calibration report.
The certificate is valid until June 17, 2024
During the whole business process, we offer Consultative Selling service.
1) Customer inquiry process:
Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2) Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.
3) Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photos to show production process.
After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
4) Installation and after sale service:
Defines installing those products in the field and providing after-sales support.